|FRAME||BallisTec Hi-MOD Carbon, 100mm travel, Zero Pivot seatstay, Carbon Link, PF30-83, 1.5 Si head tube, Ai Offset|
|FORK||Lefty Ocho Carbon, 27.5/29″, 100mm, Chamber Damper with cable lockout, OppO Spring System, tapered steerer, 50/55mm offset|
|HEADSET||Integrated, 1-1/8 to 1.5″, sealed angular contact bearings (Integrated steer stop size small only)|
|BOTTOM BRACKET||SRAM DUB PF30 MTB83|
|CHAIN||SRAM XX1 Eagle, 12-speed|
|CRANK||SRAM XX1 Eagle DUB, 34T, Ai offset|
|CASSETTE||SRAM XG-1299, 10-50, 12-speed|
|REAR DERAILLEUR||SRAM XX1 Eagle AXS|
|SHIFTERS||SRAM Eagle AXS, 12-speed|
|BRAKE LEVERS||SRAM Level Ultimate hydro disc|
|BRAKES||SRAM Level Ultimate hydro disc, 180/160mm Centerline rotors|
|GRIPS||Cannondale Locking Grips|
|HANDLEBAR||ENVE M5, Carbon, 760mm, 31.8mm, 5mm rise, 9deg sweep|
|STEM||Cannondale 1, 7075 Alloy, 1-1/8″, 31.8, 7deg|
|SADDLE||Prologo Zero II, Tirox rails|
|SEATPOST||ENVE Carbon, 31.6 x 400mm, 0mm offset|
|HUBS||(F) Lefty 60 / Rear: DT Swiss C36 12×142 rear w/ XD Driver|
|RIMS||ENVE M525 Carbon, 24h, tubeless ready|
|SPOKES||DT Swiss Aerolite (Ai Offset dish – rear)|
|WHEEL SIZE||SM: 27.5″ / MD LG XL: 29″|
|TYRES||(F) Schwalbe Racing Ray 27.5/29 x 2.25″, Snake Skin, Addix Speedgrip Compound, tubeless ready. (R) Schwalbe Racing Ralph 27.5/29 x 2.25″, Snake Skin, Addix Speed Compound, tubeless ready|
Cannondale Men’s Bike Sizing Guide
Cannondale Men’s Road Bike Sizing Guide
|Height||Inseam Leg||Bike Frame Size|
|4’10” – 5’1″||22.5″ – 27″||46 – 48cm|
|5’0″ – 5’3″||26.5″ – 28″||48 – 50cm|
|5’2″ – 5’5″||27.5″ – 29″||50 – 52cm|
|5’4″ – 5’7″||28.5″ – 30″||52 – 54cm|
|5’6″ – 5’9″||29.5″ – 31″||54 – 56cm|
|5’8″ – 5’11”||30.5″ – 32″||56 – 58cm|
|5’10” – 6’1″||31.5″ – 33″||58 – 60cm|
|6’0″ – 6’3″||32.5″ – 34″||60 – 62cm|
|6’2″ – 6’5″||34.5″ – 36″||62 – 64cm|
Cannondale Men’s Mountain Bike Sizing Guide
This is a general bike sizing guide for Cannondale mountain bikes! For a perfect fit visit any of our bike stores!
|5’0″ – 5’4″||13 – 14||XS|
|5’4″ – 5’7″||14 – 16||S|
|5’7″ – 5’10”||16 – 18||M|
|5’10” – 6’1″||18 – 20||L|
|6’1″ +||20 – 22||XL|
Getting the right fit
The right size bike for your body size is essential to ensure the optimum experience, comfort and enjoyment as you ride. With sizing varying between the type of bike, the brand and even the model, getting the perfect fit can seem daunting. That’s why we’ve compiled a handy guide to help you get the correct size.
Measure Your Height
Our handy size charts match your height to the appropriate frame size so you need to be sure you’ve measured your height accurately.
- Take off your shoes and stand with your back against a wall.
- Make sure legs are together and your shoulders are back.
- Place a pencil on top of your head and mark the wall (the best and easiest way to do this properly is with a friend to help you).
- Measure from the floor to the pencil mark you have just made with a tape measure.
Range of Reach
For most people to get the right frame size, measuring your height will suffice. However, you may find that your height is on the borderline of the range we suggest for a particular frame. If this occurs you need to measure the range of your reach or “Ape Index”. This will ensure you get a comfortable distance between the handlebars and your saddle.
- Stand up straight with your back against a wall.
- Life your arms out horizontally either side of you.
- Measure the distance from fingertip of one hand to fingertip of the other. This will give you your arm span.
- Subtract your height from this figure to get your Ape Index.
- If the result is positive (your arm span is greater than your height) you should go for the larger size of bike.
- If the result is negative (your arm span is less than your height you need the smaller size.
Stand Over Height
You should also consider your inside leg measurement when choosing your bike to ensure adequate stand over height. Stand over height is the clearance between the top tube and the bottom of your crotch. For mountain bikes we recommend a distance of 2-4 inches and for road or hybrid bikes 1-2 inches of clearance is required. This will ensure comfort when you’re stopped and standing astride the bike.
Our bike sizing charts take stand over height into consideration but if you have a particularly long or short inside leg measurement in relation to your height you will need to bear this in mind when selecting your frame size.
The way you ride and the type of bike you are into will also impact the frame size you should choose. For example, a trail devotee looking for an aggressive ride may prefer a smaller, more manoeuvrable bike size. It all comes down to personal preference and how the bike feels to you.
Our sizing charts aim to be as specific as possible so you can look up the particular type, make and model of bike you’re looking for. Remember, the sizes given in our guides are suggestions and should be used for general advice only. For the best possible fit we recommend popping in to your local Leisure Lakes Bikes store.
Choose Your Option
- LG Replica
- MD Replica
- XL Replica